How to open / close the original Japanese canister?
1. Pull the ring and remove the lock rim
How to use flush fluid
1. Warm engine to operating temperature
Motor Oil
AK. AKINAWA® MOTOR OIL LL SP 10W-40 Synthetic Blended
Fueling Power. Delivering Performance.
Product Code
AK
API Grade
SP
SAE Viscosity
10W-40
Available Sizes
1L, 4L, 5L, 20L, 208L
AKINAWA® MOTOR OIL LL SP 10W-40 Synthetic Blended manufactured from high quality synthetic components and intensified with a group of balanced additives. It conforms to the API (American Petroleum Institute) service standard SP and ensures a high degree of engine protection against wear and prevents sediment formation on engine parts.
Packing
1L
4L
5L
20L
208L
APPLICATION
AKINAWA® MOTOR OIL LL SP 10W-40 Synthetic Blended meets the requirements of gasoline-fuelled and light diesel vehicles equipped with direct fuel injection engines with variable valve timing systems and turbocharged or non-turbocharged engines, built to the latest environmental standards. Extended life of catalytic converters protects engines, operating under high loads conditions and in a start-stop mode. Recommended for all-season use.
SPECIFICATIONS / APPROVALS
∙ API SP/CF
∙ ACEA A3/B3
∙ ACEA A3/B4
∙ MB-Approval 229.3
APPLICATION BENEFITS
Synthetic blended motor oil AKINAWA® MOTOR OIL LL SP 10W-40 Synthetic Blended provides:
∙ Minimum oil consumption through burning
∙ Compatibility with all types of catalysts
∙ Excellent protection against engine wear
∙ Extended drain interval
∙ Cleanliness of engine
∙ Improved compatibility with seal materials
SPECIFICATIONS
The latest technologies of AKINAWA® OIL CORPORATION, Japan enable oils manufactured by the company to meet and exceed the requirements of most Japanese, American and European Original Equipment Manufacturers (OEM), including: TOYOTA, LEXUS, NISSAN, MAZDA, HONDA, SUZUKI, MITSUBISHI, SUBARU, DAIHATSU, ISUZU, GM, MERCEDES-BENZ, RENAULT, FIAT, SSANGYONG, HYUNDAI, KIA and others
TECHNICAL CHARACTERISTICS
| Technical property | Method | Result |
|---|---|---|
| SAE viscosity grade | SAE J300 | 10W-40 |
| Density at 15°C | ASTM D-4052 | 0,8655 |
| Flash point, °C | ASTM D-92 | 224 |
| TBN (mg KOH/g) | ASTM D-2896 | 10,10 |
| Pour point, °C | ASTM D-97 | -36 |
| Colour | ASTM D-1500 | 3,0 |
| Viscosity index | ASTM D-2270 | 158 |
| Kinematic viscosity at 40°C (cSt) | ASTM D-445 | 96,31 |
| Kinematic viscosity at 100°C (cSt) | ASTM D-445 | 14,30 |
Due to continual product research and development, the information contained herein is subject to change without notification.