How to open / close the original Japanese canister?
1. Pull the ring and remove the lock rim
How to use flush fluid
1. Warm engine to operating temperature
Motor Oil
AKINAWA® GOLD HYBRID SN 0W-16 100% Synthetic
API Grade
SN
SAE Viscosity
0W-16
Available Sizes
1L, 4L, 5L, 20L, 208L
AKINAWA® GOLD HYBRID SN 0W-16 100% Synthetic is a new generation, ultra-low-viscosity engine oil that meets specifications for SAE 16 viscosity grade oil and the American Petroleum Institute API SN standard. Ultra-low viscosity synthetic base oil, used in this product, helps to significantly reduce fuel consumption, whereas a high-tech additive package ensures that a strong oil film is formed between friction surfaces providing the necessary level of protection against engine wear.
Packing
1L
4L
5L
20L
208L
APPLICATION
AKINAWA® GOLD HYBRID SN 0W-16 100% Synthetic is designed for petrol engines of modern passenger vehicles with hybrid and conventional propulsion systems with and without turbocharging. The product provides exceptional protection to engines equipped with a start-stop system and has a high resistance to oxidation. It is recommended for year-round use.
Attention! Maximum benefits of this product can be achieved if used in modern petrol engines, both new and with low mileage, designed to operate on low viscosity resource and energy conserving oil. Not recommended for engines with extensive wear!
SPECIFICATIONS / APPROVALS
∙ API SN
APPLICATION BENEFITS
The all-season fully synthetic engine oil AKINAWA® GOLD HYBRID SN 0W-16 100% Synthetic provides:
∙ Tangible fuel economy
∙ Reliable engine protection against wear under high loads
∙ Excellent low temperature performance
∙ Maximum efficiency of hybrid propulsion systems
SPECIFICATIONS
The latest technologies developed by AKINAWA® OIL CORPORATION, Japan enable AKINAWA® GOLD HYBRID SN 0W-16 100% Synthetic to exceed the requirements of such car manufacturers as TOYOTA, LEXUS, HONDA, ACURA, NISSAN, MAZDA, SUZUKI, MITSUBISHI, DAIHATSU, SUBARU and others.
TECHNICAL CHARACTERISTICS
| Technical property | Method | Result |
|---|---|---|
| SAE viscosity grade | SAE J300 | 0W-16 |
| Density at 15°C | ASTM D-4052 | 0,8520 |
| Flash point, °C | ASTM D-92 | 205 |
| TBN (mg KOH/g) | ASTM D-2896 | 7,00 |
| Pour point, °C | ASTM D-97 | -40 |
| Colour | ASTM D-1500 | <2,5 |
| Viscosity index | ASTM D-2270 | 156 |
| Kinematic viscosity at 40°C (cSt) | ASTM D-445 | 35,80 |
| Kinematic viscosity at 100°C (cSt) | ASTM D-445 | 6,91 |
Due to continual product research and development, the information contained herein is subject to change without notification.